From airgunner to airgunner
Manufacturer of Custom Parts All XS/QB 78 QB 78 Custom Parts
QB 78 Custom Parts
This section has custom parts made by GMAC in Brass Aluminium and Black Steel all to fit the XS78 QB78
|
002-1600 Multi-Shot Self Indexing Breech .22 made in Aluminium Anodised Black for the QB/XS 78 and 79 |
£119.99
*
In stock |
|
|
|
|
5-2700-22 Gmac Barrel .22 machined to fit the Gmac Multishot breech for the QB78 and '79 the muzzle is threaded 1/2" UNF 600mm long |
£89.99
*
Currently unavailable |
|
002-3150 Black anodised barrel band for the QB 78 fitted with the Gmac Multishot breech and using a 15mm barrel. |
£16.50
*
In stock |
|
|
|
|
5-001-04 Gmac Barrel .177 machined to fit the QB78 and '79 the muzzle threaded 1/2" UNF for a silencer 600mm long |
£72.00
*
Currently unavailable |
|
|
|
|
5-001-05 Gmac Barrel .22 machined to fit the QB78 and '79 the muzzle threaded 1/2" UNF for fitting a silencer or flip 600mm long |
£72.00
*
Currently unavailable |
|
002-0720 This '79 Drop Block is made by GMAC this is to lower the level of the co2 access so that a 88 grm bottle will fit below the barrel
|
£24.96
*
Currently unavailable |
|
007-0903 Crosman Probe replacement seals .22 important to keep these seals in good condition |
£2.52
*
In stock |
|
|
|
|
001-1020 This is a silencer adaptor with a screw on muzzle flip as a thread protector to fit the XS standard 9/16" barrel
|
£29.46
*
Currently unavailable |
|
|
|
|
001-1021 This is a silencer adaptor with a screw on muzzle flip as a thread protector Deluxe barrel 15mm
|
£29.46
*
Currently unavailable |
|
|
|
|
001-0310 This Barrel Band is to replace the original plastic barrel band made from solid Brass to fit the standard 9/16" barrel
|
£15.00
*
In stock |
|
|
|
|
001-0311 This Barrel Band is to replace the original plastic barrel band made from solid Brass to fit the 15mm barrel
|
£15.00
*
In stock |
|
|
|
|
004-1052 This Barrel Band is to replace the original plastic barrel band made from solid Aluminium to fit the standard 9/16" barrel
|
£15.00
*
Currently unavailable |
|
|
|
|
004-1053 This Barrel Band is to replace the original plastic barrel band made from solid Aluminium to fit the 15mm barrel
|
£15.00
*
Currently unavailable |
|
|
|
|
001-0055 Brass CO2 Cap for the XS/QB Machined from solid brass this is a direct replacement for the original |
£15.00
*
In stock |
|
|
|
|
001-0056 Replacement Co2 cap to convert your QB/XS78 & XF501 to Bulk Fill Co2 with this adaptor with Brass Cap NOT FOR HPA |
£28.02
*
Still in stock |
|
|
|
|
001-0057 QB/XS 78 Bulk Fill Adaptor Kit you use the existing cap after drilling out the center hole NOT FOR HPA |
£15.00
*
In stock |
|
|
|
|
001-0058 XS/QB78 Extended Brass Bolt Handle made from solid brass and polished this bolt is 1/2" (12.5mm) longer than the standard bolt |
£12.60
*
Currently unavailable |
|
|
|
|
001-0363 A Polished Solid Brass Trigger for the XS/QB range a direct replacement the original part |
£19.98
*
Currently unavailable |
|
001-0060 This is a polished solid brass end cap for the main tube just to add a bit of class to your rifle |
£7.50
*
In stock |
|
|
|
|
001-0061 This is a polished solid brass end cap for the breech a direct replacement just to add class |
£7.50
*
In stock |
|
|
|
|
001-0364 QB/XS Trigger Improvement Kit this low cost complete kit will smooth out your trigger action
|
£4.98
*
In stock |
|
|
|
|
007-1300 Replacement Barrel 'O' rings for the QB/XS pack of 10 for the '78 standard or deluxe and the '79
|
£2.52
*
Currently unavailable |
|
|
|
|
007-1301 QB/XS Replacement Co2 Seals Pack of 2 the seals for the fill cap and the exhaust valve seal
|
£2.46
*
Currently unavailable |
|
|
|
|
007-1302 QB/XS Service Seal Kit contains barrel seals co2 cap and valve probe and transfer port
|
£3.96
*
Currently unavailable |
|
|
|
|
007-1303 QB/XS Replacement Transfer Port Seal for the 78 and the 79 this seal alone will increase the performance
|
£1.50
*
Currently unavailable |
|
|
|
|
007-1305 ASA Seals this seal fits paintball valves/slide check valves/drop blocks/paintball adaptor etc. packs of 4
|
£2.52
*
In stock |
|
|
|
|
004-1403 Aluminium Silencer Adapter 65mm long tapered to the barrel fixed with a grub screw with a male 1/2" UNF thread |
£15.00
*
Currently unavailable |
|
|
|
|
004-1404 Aluminium Silencer Adapter 65mm long tapered to the barrel fixed with a grub screw with a male 1/2" UNF thread |
£15.00
*
Currently unavailable |
|
|
|
|
004-1420 This is a polished solid Aluminum end cap for the breech a direct replacement just to add class |
£7.50
*
Currently unavailable |
|
|
|
|
004-1421 This is a polished solid aluminum end cap for the main tube just to add a bit of class to your rifle |
£7.50
*
Currently unavailable |
|
|
|
plus delivery
| 1 - 30 of 44 results |
|
