From airgunner to airgunner
WHEN YOU HAVE FOUND THE PART NUMBER YOU WANT THE PART WILL BE LISTED BELOW
PLEASE CLICK DIAGRAM TO ENLARGE...
007-0911 Seal Kit for the Crosman Maruader Model Number BP2220 includes all the seals in the gun |
£15.00
*
Currently unavailable |
|
105-039 Steel Safety Ball this is a vital part of the gun safety mechanism works with the spring part number 1322-017 |
£1.50
*
In stock |
|
105-054 Screw black screw to secure the grips to the pistol grip they are slot head screws |
£1.56
*
In stock |
|
130-035 Valve Seal this 'O'ring is used on the valve (alternative in custom section 4 seal kit)
|
£1.50
*
In stock |
|
130-036 Transfer port seal this fits between the main tube and holds the transfer port (included in custom section 4 seal kit) |
£1.50
*
In stock |
|
1322-017 Safety Spring puts pressure on the safety ball to hold the safety bar in position |
£1.56
*
In stock |
|
1322-052 Safety Bar ( Alternative Satety Bar is listed in the custom section made from solid brass ) |
£5.10
*
In stock |
|
1322B044 Trigger Cover Three screws this is the plastic cover for the frame part number 1322B051
|
£4.62
*
In stock |
|
1700-008 Screw four of these screws are needed to secure the breech to the main tube of the BP2220 |
£1.80
*
In stock |
|
1700-009 Hammer Spring fits with guide adjuster part number 1700-011can be adjuster with a 3/16" allen key |
£5.04
*
Currently unavailable |
1700-010 Screw three of these screws are used to secure the valve part number 1700-100 to the main tube |
£2.28
*
Currently unavailable |
|
1700-011 Hammer Spring Guide this part is also a adjuster with a hole through so that you can adjust the striker |
£5.40
*
In stock |
|
1700-012 Tube Cap fits the rear of the main reservoir tube giving access to adjust the hammer and spring |
£19.44
*
In stock |
|
1700-015 Hammer Pin for the hammer part number 2009A009 used for the drop sear trigger unit
|
£4.32
*
Currently unavailable |
1700-018 Bolt Stud there is two positions that accept this part on the probe bolt depending on left or right hand use |
£5.82
*
In stock |
|
1700-019 Bolt Indexing Plate you can reverse the position of the plate and the probe stud 1700-018 to Left or Right Hand |
£7.20
*
In stock |
|
1700-029 Grip Frame Screw two used on the 1701P Silhouette and one on the Maruader BP2220. |
£1.74
*
In stock |
|
1700-100 Valve Assembly this is the complete valve assembly including the seal made in aluminium and anodised |
£39.96
*
In stock |
|
1700-101 Fill Adapter Assembly this is a complete unit with fill nipple and filter body made in aluminium |
£29.28
*
In stock |
|
1700-104 Pressure Gauge (Manometer) Port Assembly anodised black including two 'O' ring seals. |
£13.14
*
Currently unavailable |
|
1700-140 Valve Stem, Overmolded a essential part when servicing the valve part number 1700-100 |
£6.00
*
Currently unavailable |
|
1700B005 "O" Ring Seal used on the Valve the Fill Assembly and the Guage Port Assembly CROSMAN NO. CHANGE WAS 1700A005 |
£1.44
*
In stock |
|
1761-102 Cap Assembly this cap is to protect and keep clean the fill nipple on part number 1761-101 |
£14.99
*
In stock |
|
1761A023 O-Ring this seal is used between the pressure gauge 1761-014 and the adapter 1761-017 |
£1.50
*
In stock |
|
1763-023 Grub Screw this grub screw is longer than the 88-089 grub screw used in many positions |
£1.50
*
In stock |
|
1763-033 Pressure Gauge maximum pressure 3500psi marked red at 3000psi the working pressure |
£15.00
*
In stock |
|
1763-056 Trigger Cover Screw this is the allen head screw that requires a 1/16" allen key can be used to replace 1322-054 |
£1.50
*
In stock |
|
1763A036 Stiker this part screws into the hammer part number CH2009-009 making the hammer adjustable with a 1/8" allan key
|
£8.58
*
Still in stock |
|
190B-008 O-Ring this seal is used between the two section of the Piercing Block Assembly AS2250-001 and AS2250-002 |
£1.98
*
In stock |
|
2220-002 Forestock fixed with two screws part number 2220-003 to barrel band and mounting plate |
£9.30
*
In stock |
|
plus delivery
1 - 30 of 51 results |
|