From airgunner to airgunner
This section has custom parts made by GMAC in Brass Aluminium and Black Steel all to fit the Crosman 2260
007-0920 Crosman Transfer Port and Seals full sized transfer port with seal 130-036 plus a GMAC Topseal
|
£4.98
*
In stock |
|
002-0600 Multi-Shot Self Indexing Breech .22 made in Aluminium Anodised Black for the Crosman 2240 2250 2260 |
£110.04
*
In stock |
|
001-0002 Made from solid brass this adapter is 65mm long with a male 1/2" UNF thread tapered to the barrel ideal for the Ratty |
£12.60
*
In stock |
|
001-0009 Silencer Adapter for the Crosman barrel 50mm long with Sight Pin made in solid brass with 1/2" unf thread |
£16.50
*
Currently unavailable |
001-0010 Brass screw in Sight Pin over length so that you can adjust to suit your needs screw fit
|
£3.54
*
In stock |
|
001-0011 Silencer thread protector made from solid brass smooth finish for the Crosman silencer adapters |
£7.02
*
In stock |
|
001-0021 Made from solid brass and polished this will fit the 22xx and 13xx range barrels Ideal for the 2250 and 2260
|
£27.00
*
In stock |
|
001-0022 This is a solid brass muzzel flip to fit the crosman 7/16" barrel 65mm long fitted with a sight pin |
£18.60
*
Currently unavailable |
001-0025 This is a solid brass muzzle flip to fit the crosman 7/16" barrel fixed with a grub screw 65mm long |
£15.00
*
In stock |
|
001-0026 Polished Solid Brass screw on muzzle flip/thread protecter 45 mm long for the 50mm or 65mm Gmac Silencer Adapter
|
£15.00
*
In stock |
|
001-0042 Made from solid brass this filler cap with a knurled finish is to replace the original on the 2260 |
£16.08
*
In stock |
|
001-0100 Power hammer spring the same size as the original but stronger complete with brass guide to fit the 22XX range |
£5.52
*
In stock |
|
001-0101 Brass Power Adjuster adjustment screw and locking band have a knurled finish to fit the Crosman 2240 2250b 2260 |
£19.99
*
In stock |
|
001-0109 A New Custom Valve Spring for the 22xx valve This valve spring is 30% lighter than the original
|
£3.60
*
In stock |
|
001-0112 Brass 12g co2 powerlet eliminater to fit the crosman 2260 the cap has a knurled finish with a 1/8 NPT female thread NOT FOR HPA |
£22.20
*
In stock |
|
001-0120 This is a replacement for part number 2250-004 end cap for the 22XX made in solid brass |
£8.04
*
Currently unavailable |
001-0121 This is a replacement end cap made in solid brass for the Crosman steel breech or Gmac breeches |
£6.00
*
In stock |
|
001-0200 This is a extended probe to replace the original made from solid brass in .22 with a black steel bolt handle |
£13.02
*
In stock |
|
£15.00
*
In stock |
|
|
001-0206 This is a extended probe .22 made from solid brass a earth magnet recessed in the back of the probe with a black steel bolt handle |
£16.50
*
Currently unavailable |
|
001-0207 This is a extended probe .177 made from solid brass with the added benefit of a earth magnet recessed in the back of the probe |
£16.50
*
In stock |
|
001-0204 New Extended Gmac Hollow Probe LEFT HAND
Check out the video and test results on this probe.
|
£15.00
*
In stock |
|
001-0205 New LEFT HAND Extended Gmac Hollow Probe .177 fitted with a steel bolt handle for Crosman
|
£15.00
*
In stock |
|
001-0212 Gmac Brass Extended Hollow Probe ONLY in .22 caliber for Crosman 22xx range (no bolt handle) |
£10.02
*
In stock |
|
001-0214 Brass Hollow Probe LEFT HAND .22 probe only no bolt handle for the Crosman 22xx range |
£10.02
*
In stock |
|
001-0210 Brass Pin Probe ONLY .22 complete with seal no bolt handle for the Crosman 2240 2250 2260 1322
|
£9.00
*
In stock |
|
001-0270 Gmac Black Steel Bolt Handle for Crosman Probe 34mm long this is longer than the standard Crosman bolt handle |
£6.00
*
In stock |
|
001-0271 Gmac Long Black Steel Bolt Handle for Crosman Probe 44mm long this will give a better grip with the extra length |
£7.02
*
Currently unavailable |
001-0273 Solid Brass Smooth Bolt Handle for the Crosman These brass decorative handles must be used according to instructions
|
£7.02
*
Currently unavailable |
|
001-0275 Solid Brass Ringed Bolt Handle for the Crosman These brass decorative handles must be used as directed |
£8.04
*
Currently unavailable |
plus delivery
1 - 30 of 175 results |
|
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM PARTS MADE FROM SOLID BRASS AND POLISHED
IN THIS SECTION YOU WILL FIND TRIGGERS PROBES AND HANDLES THAT WILL FIT THE CROSMAN 2260 AND 1760
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM PARTS MADE FROM ALUMINIUM AND POLISHED
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM PARTS MADE FROM STEEL AND BLACKED
MANUFACTURED BY GMAC IN THE U.K. IN OUR OWN WORKSHOP CUSTOM BREECHES MADE FROM SOLID BRASS
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM MADE FROM 6061 ALUMINIUM AND POLISHED
THIS SECTION HAS SCREW KITS IN BLACK STEEL AND STAINLESS STEEL SEAL KITS AND CUSTOM SPRINGS