From airgunner to airgunner
This section has custom parts made by GMAC in Brass Aluminium and Black Steel all to fit the Crosman 1322
007-0920 Crosman Transfer Port and Seals full sized transfer port with seal 130-036 plus a GMAC Topseal
|
£4.98
*
In stock |
|
007-1377 Seal and Service Kit for the Crosman Pump Pistols models 1377 - 1322 - 2289 - PC77
|
£8.10
*
In stock |
|
001-0011 Silencer thread protector made from solid brass smooth finish for the Crosman silencer adapters |
£7.02
*
In stock |
|
001-0026 Polished Solid Brass screw on muzzle flip/thread protecter 45 mm long for the 50mm or 65mm Gmac Silencer Adapter
|
£15.00
*
In stock |
|
001-0100 Power hammer spring the same size as the original but stronger complete with brass guide to fit the 22XX range |
£5.52
*
In stock |
|
001-0121 This is a replacement end cap made in solid brass for the Crosman steel breech or Gmac breeches |
£6.00
*
In stock |
|
001-0122 This is a replacement for part number 1322B002 end cap for the 13XX made in solid brass
|
£8.04
*
In stock |
|
001-0200 This is a extended probe to replace the original made from solid brass in .22 with a black steel bolt handle |
£13.02
*
In stock |
|
£15.00
*
In stock |
|
|
001-0206 This is a extended probe .22 made from solid brass a earth magnet recessed in the back of the probe with a black steel bolt handle |
£16.50
*
Currently unavailable |
|
001-0204 New Extended Gmac Hollow Probe LEFT HAND
Check out the video and test results on this probe.
|
£15.00
*
In stock |
|
001-0212 Gmac Brass Extended Hollow Probe ONLY in .22 caliber for Crosman 22xx range (no bolt handle) |
£10.02
*
In stock |
|
001-0214 Brass Hollow Probe LEFT HAND .22 probe only no bolt handle for the Crosman 22xx range |
£10.02
*
In stock |
|
001-0210 Brass Pin Probe ONLY .22 complete with seal no bolt handle for the Crosman 2240 2250 2260 1322
|
£9.00
*
In stock |
|
001-0271 Gmac Long Black Steel Bolt Handle for Crosman Probe 44mm long this will give a better grip with the extra length |
£7.02
*
Currently unavailable |
001-0273 Solid Brass Smooth Bolt Handle for the Crosman These brass decorative handles must be used according to instructions
|
£7.02
*
Currently unavailable |
|
001-0275 Solid Brass Ringed Bolt Handle for the Crosman These brass decorative handles must be used as directed |
£8.04
*
Currently unavailable |
001-0303 Barrel band for the 1377/1322 made in solid brass to replace the standard plastic band a longer barrel can be used |
£30.00
*
Currently unavailable |
001-0304 Barrel band for the 1377/1322 made in solid brass With 1/2" UNF thread for Silencer |
£39.96
*
In stock |
|
001-0351 Made from solid brass this MK2 curved trigger to fit the trigger frame with two slot head screws on the cover
|
£17.52
*
Currently unavailable |
|
001-0352 Made from solid brass this MK2A trigger has been modified to fit the NEW trigger frame
|
£17.52
*
In stock |
|
001-0355 The MK2 complete trigger make over kit for the Crosman 22XX & 13XX with polished brass trigger
|
£30.00
*
Currently unavailable |
001-0356 Made from solid brass this MK2A trigger kit has been modified to fit the NEW trigger frame
|
£30.00
*
In stock |
|
001-0357 Adjustable trigger spring, the adjuster made in brass. Very easy to fit, no need to fully dismantle. |
£9.60
*
Currently unavailable |
001-0358 Solid stainless steel trigger sear to replace the original This sear is 3mm wide removing the slope |
£5.52
*
In stock |
|
001-0360 Solid Brass Safety Bar a direct replacement for the original plastic bar will fit the 2240 2250 1377 1322
|
£9.00
*
In stock |
|
004-0421 This is a replacement end cap for the crosman steel breech made in 6062 Grade Aluminium |
£6.00
*
In stock |
|
004-0434 This is a replacement for part number 1322B002 end cap for the 13XX made in 6062 Aluminium Polished
|
£8.04
*
Currently unavailable |
|
001-0500 Gmac Black Steel Breech Only with two grub screws to hold the barrel will fit the 22xx and the 13xx |
£39.00
*
Currently unavailable |
001-0501 Gmac Black Steel Breech Kit with brass probe .22 will fit all the Crosman 22xx range & 1322
|
£49.02
*
Currently unavailable |
plus delivery
1 - 30 of 106 results |
|
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM PARTS MADE FROM SOLID BRASS AND POLISHED
IN THIS SECTION YOU WILL FIND TRIGGERS PROBES AND HANDLES THAT WILL FIT THE NEW CROSMAN 1322
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM PARTS MADE FROM ALUMINIUM AND POLISHED
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM PARTS MADE FROM STEEL AND BLACKED
MANUFACTURED BY GMAC IN THE U.K. IN OUR OWN WORKSHOP CUSTOM BREECHES MADE FROM SOLID BRASS
MANUFACTURED BY GMAC IN THE UK IN OUR OWN WORKSHOP CUSTOM MADE FROM 6061 ALUMINIUM AND POLISHED
THIS SECTION HAS SCREW KITS IN BLACK STEEL AND STAINLESS STEEL SEAL KITS AND CUSTOM SPRINGS